Short answer
Choose a barrel whose inside diameter (bore) is slightly larger than your paint, so the ball fits snugly without rattling or getting stuck. Barrel length matters less than most players expect, and thread compatibility with your marker matters a lot. When in doubt, test your actual paint in the barrel before game day.
What bore size is
The bore is the inside diameter of the barrel. It is measured in thousandths of an inch, such as .685 or .690. Standard paintballs are .68 caliber, which means the ball is close to that diameter, but real paint varies a little between brands, batches and storage conditions.
Barrels are often sold in a range of bores or with inserts, so you can match them to the paint you use. An old community measurement chart of stock barrels found bores in the high .680s to low .690s for many markers, and it recommends choosing paint based on the effective bore at the muzzle end. That chart is for older markers, so treat it as background only and check your own barrel.
Matching paint to bore
- If the paint is too small for the bore, it can rattle and fly less consistently.
- If the paint is too large, it can drag, break in the barrel or cause chops.
- A common guideline is to choose paint just under the bore size, within about a thousandth of an inch, but follow your barrel maker’s advice.
- Paint size varies with temperature, humidity and age, so recheck when conditions change. See how long paintballs last.
For help choosing paint, see our guide to the best paintballs.
How to test the fit
- Hold the barrel pointing up with the breech end down, and drop a ball in from the muzzle end.
- The ball should roll or settle without sticking.
- Turn the barrel so it points down and see whether the ball drops out freely.
- Test several balls from different bags, since paint varies.
- In the field, watch for broken paint in the barrel and use a swab to check.
A ball that sticks or bounces badly suggests a mismatch. A ball that drops through with no resistance may be loose.
Barrel length and style
Barrel lengths commonly run from about 10 to 16 inches or more. Longer barrels may help with sound and some players find them steadier, but forum discussions point out that most of the accuracy comes from the bore and fit rather than length alone (see which paintball gun is the most accurate). Choose a length that suits your marker’s balance and your play style. Compact barrels help in tight spaces.
Thread compatibility
Barrels attach with specific thread patterns, and not all markers use the same one. Check that the barrel you want matches your marker’s thread or comes with an adapter. If you are not sure, ask the shop or manufacturer.
Barrel kits and inserts
Some systems use a single barrel body with interchangeable inserts of different bores. These make it easier to match changing paint, but they cost more. Kits are a good choice if you buy paint from different sources.
Cleaning and care
- Swab the barrel after play and clear broken paint immediately. See how often to clean a paintball gun.
- Use a clean, dry swab rather than harsh chemicals unless the maker says otherwise.
- Check that the barrel is not dented or bent.
For broader setup advice, see the complete paintball equipment guide.